Discount Builders Merchants - Aluminium Starter Track (50mm) 2.5m Length

NORTHFLEET: 01474 569 874

Log In My Cart0 Items £0.00

Currently Delivering to the following Postcodes: DA, ME, TN, SE, RM, BR, CR & IG

EWI-64410 Aluminium Starter Track is required when installing EWI insulation systems. The Starter Track sits just above the DPC layer (near the bottom of the wall) and acts as a stable, protective ledge on which you can build up the insulation boards.

Product thumbnail.

EWI-64410 Aluminium Starter Track is required when installing EWI insulation systems. The Starter Track sits just above the DPC layer (near the bottom of the wall) and acts as a stable, protective ledge on which you can build up the insulation boards.

SKU:

1017506

Price:

£8.40

Quantity:

Click & Collect

Product Specifications

Technical Specifications
2.5 metres
0.6mm Thickness
Available in different widths
Quick and easy installation
Fix to the wall at 300mm centres

No documents available.

Premium Basecoat is breathable, high strength and durable. EWI-225 is EWIPro’s finest basecoat adhesive, and can be used for a range of solutions. For example, this product is ideal as a basecoat/adhesive for Mineral Wool, Kingspan K5 and Wood Fibre insulation boards, or as a render-only solution for a range of substrates, including render carrier board.

The adhesive contains white Portland cement and a high concentration of polymer-modified binders – making it stronger than other basecoat adhesives, such as EWI-220. Once the basecoat has dried it provides an incredibly strong and flexible reinforcement layer; we therefore highly recommend this product for ‘render only’ systems.

You can use our Premium Basecoat for the following two purposes:

An adhesive used to create the reinforcement basecoat layer in render only or Mineral Wool, EPS, Kingspan K5 and Wood Fibre EWI systems
An adhesive used to fix Mineral Wool (Rockwool) to a substrate.
Premium Basecoat is prepared in the same way regardless of whether it is being used as a basecoat or an adhesive for fixing the Mineral Wool insulation boards to the substrate. The Premium Basecoat comes as a dry mix in 25kg so needs to be mixed with clean, cold water ( >5.9 litres) prior to use.

We suggest filling a large bucket with the correct quantities of water prior to adding the dry basecoat mixture. Use a paddle mix to mix the basecoat with water until you have achieved an even consistency mortar. Leave the bucket for 5-10 minutes after mixing, and then mix again before using the adhesive.

Premium Basecoat / Adhesive 25kg

1017502

£18.60

TC - Clip on Profile 6mm 2.5m Long

1017507

£6.30

This uPVC Render Corner Bead – No Nose (2.5m) comes in lengths of 2.5m and used for reinforcing 90-degree angles in the building structure. Corner beading is crucial for strength and clean lines around windows, corners and door frames. The corner bead is specifically designed to reduce damage, and minimise the formation of cracks around openings.

TC - Corner Bead White Mesh 2.5m Long

1017508

£3.54

10mm Hammer Fixing with Plastic Pin is used to fasten polystyrene EPS foam to category A, B, C, D and E substrates. Fast, easy and reliable fixing. Telescopic design, guarantees its proper fixing in the the substrate and flush fitting of the collar with the EPS insulation. The pin is made from reinforced fibreglass, which do not break during installation, even when heavily hammered. The large amount of pocket adhesives on the telescopic collar increases the adhesiveness of the mortar.

FixPlug10 - Plastic Fixing EWI 120mm - 10mm (200)

1017511

£42.00

Discount Builders Merchants

Discount Builders Merchants

Secure payments

INFORMATION

CATEGORIES

Store location

MY ACCOUNT

Copyright © 2018 Kerridge Commercial Systems Limited. All rights reserved. Disclaimer | Privacy Policy | Contact Us

Powered by K8 Web Builder